TYPICAL PHASE NOISE AND JITTER REPORT FOR THE VCC6 SERIES

  10 Aug 2018

The device is designed to meet the requirements of GSM and LTE base station designs, and offers a wide range of clock management and distribution features to simplify baseband and radio card clock tree designs. Spreading of the spectrum line caused by phase noise must be minimised in the local oscillator for a superheterodyne receiver because it defeats the aim of restricting the receiver frequency range by filters in the IF intermediate frequency amplifier. Pin Count is the number of pins, balls, or pads on the device. Such perfect spectral purity is not achievable in a practical oscillator. Package Description The package for this IC i. View Detailed Evaluation Kit Information. The various ranges specified are as follows:

Spreading of the spectrum line caused by phase noise must be minimised in the local oscillator for a superheterodyne receiver because it defeats the aim of restricting the receiver frequency range by filters in the IF intermediate frequency amplifier. Phase noise can be measured and expressed as single sideband or double sideband values, but as noted earlier, the IEEE has adopted the definition as one-half of the double sideband PSD. An Evaluation Board is a board engineered to show the performance of the model, the part is included on the board. If a model is not available for web samples, look for notes on the product page that indicate how to request samples or Contact ADI. Oscillators Frequency domain analysis Telecommunication theory Noise electronics. Please consent to the use of cookies on your device as described in our cookie notice and updated Privacy Policy.

Oscillator phase noise often includes low frequency flicker noise and may include white noise. A particularly important type of phase noise is that produced by oscillators.

It is important to note the scheduled dock date on the order entry screen. You can change your cookie settings at any time. The various ranges specified are as follows:.

vetron晶振VCC6系列晶体振荡器规格书_百度文库

Pricing displayed is based on 1-piece. Also, please note the warehouse location for the product ordered.

The HMC is a high performance, dual-loop, integer-N jitter attenuator capable of performing reference selection and generation of ultralow phase noise frequencies for high speed data typicao with either parallel or serial JESDB type interfaces. For more information about lead-free parts, please consult our Pb Lead free information page. Phase noise can be measured using a zeries analyzer if the phase noise of the device typical phase noise and jitter report for the vcc6 series test DUT is large with respect to the spectrum analyzer’s local oscillator.

The device is designed to meet the requirements of GSM and LTE base station designs, and offers a wide range of clock management and distribution features to simplify baseband and radio card clock tree designs. Phase noise measurement systems are alternatives to spectrum analyzers.

Products Viewed

General Low-pass filter Median filter Total variation denoising Wavelet denoising. The phase noise components spread the power of a signal to adjacent reporr, resulting in noise sidebands.

The HMC meets the requirements of multi-carrier GSM and LTE base-station rrport and offers a wide range of clock management and distribution features to noixe baseband and typical phase noise and jitter report for the vcc6 series card clock tree designs. For detailed drawings and chemical composition please consult our Package Site.

The high performance dual-loop core of the HMC enables the base station designer to attenuate the incoming jitter of a primary system reference clock, such as a CPRI source, with the help of the narrow-band configured first PLL loop, which disciplines an external VCXO, and generate the low phase noise, high frequency clocks with the wider-band second PLL to drive data converter sample clock inputs.

The specific part is obsolete and no longer available. Wikipedia articles incorporating text from the Federal Standard C Articles prone to spam from August Most serids ship within 48 hours of this date. For new designs, ADI recommends utilization of these products.

The model has been scheduled for obsolescence, but may still be purchased for a limited time. Pin Count is the number of pins, balls, or pads on the device.

If a model is not jtter typical phase noise and jitter report for the vcc6 series web samples, look for notes on the product page that indicate how to request samples or Contact ADI. Please consent to nosie use of cookies on your device as described in our cookie notice and updated Privacy Policy. Care should be taken that observed values are due to the measured signal and not the shape factor of the spectrum analyzer’s filters.

Temperature Range This is the acceptable operating range of the device. Please Select a Region. This page was last edited on 7 Julyat List of noise topics Acoustics Colors of noise Interference communication Noise generator Radio noise source Spectrum analyzer Thermal radiation.

Phase noise is a type of cyclostationary noise and is closely related to jitter. Other models listed in the table may still be available if they have a status that is not obsolete. International prices may vary due to local duties, taxes, fees and exchange rates.

Package Description The package for this IC i. Due to environmental concerns, ADI offers many of our products in lead-free versions. View Detailed Evaluation Kit Information. For volume-specific price or delivery quotes, please contact your local Analog Devices, Inc. Model The model number is a specific version of a generic that can be purchased or sampled.

Pin Count Pin Count is the number of pins, balls, or pads on the device. The various ranges specified are as follows: